Now, the application of plastic shell has been widely up, life, we are very common, such as: electrical shells, and our usual washbasin, all belong to the plastic, but in the plastic processing, color instability is a common problem.
The first thing to check is the temperature of the
injection molding machine, the color is unstable, and the temperature of the
injection molding machine is sometimes high and low is related, so, in the plastic shell processing, must be a priority check. 2.
2. sometimes the back pressure is adjusted too much, the production cycle is not stable, the production cycle is not stable, on and off, will make the color change.
3. The mixer does not follow the mixing process to mix the color powder and raw materials, such as insufficient time, the way of adding materials or the order of adding materials is inconsistent leading to uneven color separation, which is also one of the causes of unstable color, so it is also important to check when processing plastic shells.
4. Because the humidity of the raw material is too large, the viscosity inside has not yet spread, and finally it will cause the unstable color of the plastic processing.
5. the amount of water outlet material back to the amount of more and less, which has a greater impact on the light-colored injection molded parts.
6. inconsistent grade of raw materials. As each raw material base color is different, resulting in the same color powder
injection molding parts color will be different. Sometimes the same supplier, the raw material batch number is different, the base color will be some deviation, so the color deviation requirements of high products, and even to control to each batch of incoming material whether the base color is consistent.
7. The quality of the color powder is too poor, not heat-resistant, or with the wrong color powder for the raw materials, will make the color is not stable.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
Gas-assisted injection molding
Gas-assisted injection molding is a process in which high-pressure nitrogen gas is injected directly into the plastic being plasticized in the mold cavity through the main and auxiliary controllers...
Points to note for the maintenance of two-color injection molds
1. Check for rust or moisture at the air vents,If you find rust or moisture near the hot runner vent, it means internal condensation or possibly a broken water pipe. Humidity can cause...
Two-color plastic molds have formed a large industrial chain
In recent years, driven by the demand of high-tech and pillar industry applications, China's two-color plastic moulds have formed a huge industrial chain. From the upstream raw...
What problems can occur in the injection molding process of spray-free plastics?
Green water and green mountains, is the silver mountain of gold, environmental protection issues are becoming increasingly prominent, environmental protection industry, environmental protection products have become an important direction of China's econo