The two most important processes of two-color injection molding are filling and pressure-holding, below, we will tell you how to control the pressure in two-color injection molding process.
1. Injection pressure
In the current two-color injection molding process, almost all injection pressures are based on the pressure applied to the plastic by the top of the plunger or screw (converted from the oil circuit pressure). The role of injection pressure in injection molding is to overcome the resistance of plastic flow from the barrel to the cavity, to give the rate of molten material filling and to compact the molten material.
2. Plasticizing pressure
In injection, the amount of plasticizing pressure is required to change according to the design of the screw, the quality of the product and the type of plastic. If these conditions and the speed of the screw are constant, increasing the plasticizing pressure will strengthen the shearing effect, i.e., it will increase the temperature of the melt, but it will reduce the efficiency of plasticization, increase the backflow and leakage, and increase the driving power.
In addition, increasing the plasticizing pressure often leads to uniform temperature of the melt, uniform mixing of the color and discharge of gas from the melt. In general operation, the decision of plasticizing pressure should be in the premise of ensuring the excellent quality of the product the lower the better, the specific value is different with the variety of plastic two-color mold used, but usually rarely exceed 20 kg / cm2.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
What is the basic process of plastic thermoforming?
The basic process of thermoforming is: sheet clamping → heating → forming → cooling → demolding. Among them, molding is the most important and complicated. Most of the thermoforming is carried out on a molding machine, which varies greatly with the thermo
Common problems of injection molding machine clamping system
The injection molding machine clamping system is very important to the injection molding machine. Here we will talk about the treatment of common problems.(A) does not lock the mold,Treatment methods...
16 kinds of thin-walled injection molding defects improvement method full explanation
I. What is thin-wall injection molding,Thin-wall injection molding technology is also known as thin-wall plastic injection molding technology. There are three definitions of it as follows...
Injection molding design: ten keys to success (II)
The first part of this article detailed five of the ten main design-related parameters that affect the quality of injection molded parts: material selection and consequences, critical tolerance, dent marks...