Mold opening is the most prone to vibration, and vibration has a greater impact on the life and stability of the machine, so please note the following when adjusting mold opening and clamping: slow mold opening speed is the speed of mold start, so the speed is below medium speed, generally use slow medium pressure, because there is a certain amount of deformation of the template to generate clamping force when clamping, so the starting pressure can be appropriately larger, generally around 50%, slow speed position depends on the model, generally turn fast mold opening for reducing the opening time when the mold is opened to a little bit of position.
Fast mold opening speed pressure can be appropriately large to reduce the mold opening time, but the fast mold opening position and slow mold opening position must be appropriately spaced apart, because the impact and inertia is relatively large when the mold is opened quickly, a distance must be taken to eliminate the impact of inertia on the mold opening termination position.
But if the interval distance is too large will extend the mold opening time, you can adjust the deceleration opening speed pressure to very small, generally in about 10-20 as long as it can support the template to overcome the resistance of the minimum power.
Try not to have the impact bounce phenomenon when the mold is terminated. Because the instant acceleration of the bounce is very large, the wear and tear on the machine hinge is also very large, and the mold opening termination position can not be stabilized in a small range.
Fast clamping speed can be appropriately large to reduce the transfer time, but the pressure does not need to be too large, fast clamping position should be greater than the thickness of the product, in order to reach the thickness of the product is to switch to low-pressure clamping position.
Low-pressure clamping speed is generally controlled within 30%, the pressure is generally 0, and the special mold should also be controlled to offset the resistance of the mold spring/slider and other minimum to achieve the purpose of low-pressure protection.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
Injection Mold Processing
The plastic inside the mold is gradually and evenly coated and melted and adhered to the whole surface of the mold cavity under the action of gravity and heat energy, and then molded into the desired shape and made by cooling and shaping...
How to protect the injection molding machine
Therefore, how to ensure the normal and stable operation of injection molding machines in continuous production is a problem worthy of attention and effort for both injection molding machine manufacturers...
Analysis of the causes of under-injection of injection molded products
Under-injection, also known as short shot, under-filling, under-filled parts, commonly known as under-injection, refers to the phenomenon of partial incompleteness...
Injection molding machine ejector pin failure repair practical methods
When the ejector pin action of the hydraulic injection molding machine is abnormal, we can check and troubleshoot one by one for the following reasons: first of all, you...