The low-pressure injection molding process is a system packaging process method that injects hot melt material into the mold with very low injection pressure (1.5 to 40 bar) and cures the mold quickly (5 to 50 seconds), which consists of material, mold, equipment, and application technology.
It is mainly applied to the encapsulation and protection of precise and sensitive electronic components, including printed circuit boards (PCBs), automotive electronics, cell phone batteries, wire harnesses, waterproof connectors, sensors, micro switches, inductors, antennas, ring cords, etc.
Specific advantages of the low-pressure injection molding process are as follows.
I. Improve the performance of the end product, waterproof sealing, insulation and flame retardant, high and low-temperature resistance, and other characteristics
(1) Excellent encapsulation protection function.
(2) Very low injection pressure, no damage to components, very low defective rate.
II. Shorten the product development cycle and greatly improve production efficiency
(1) molding mold can be cast aluminum mold, very easy mold design, development, and processing manufacturing can shorten the development cycle.
(2) The curing process cycle is shortened from about 24 hours previously to within 5~50 seconds.
III. Reduce the total cost of production
(1) Significantly reduce the number of encapsulation materials.
(2) No need for an oven for curing, saving energy consumption.
(3) The use of lower-cost aluminum molds instead of steel molds.
(4) Eliminating the potting shell and water cooling system for the potting and sealing process.
(5) Due to low pressure and low temperature, the scrap rate of finished products can be greatly reduced and unnecessary waste can be avoided.
(6) Save the shelf, site, and corresponding time and labor cost for heating and curing equipment and process after potting or natural drying.
Last: The four stages of filling, holding pressure, cooling and demolding tell you - what is the plastic injection molding process Next: Common product defects and their causes in the injection molding process
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
Why do plastic products crack and do you know the reason?
Cracking, including the surface of the parts filamentary cracks, microcrack, top white, cracking and due to the parts sticky mold, runner sticky mold and caused or trauma crisis...
Plastic machinery injection molding machine hydraulic fragment in the use of what to pay attention to?
1 The use of people should be clear about the principle of plastic machinery equipment plastic machine hydraulic transmission system, to understand a variety of actual operation and adjustment of the handle parts and rotation...
Injection parameters and control
Temperature,Temperature measurement and control are very important in injection molding. Although it is relatively simple to make these measurements, most injection molding machines do not have adequate pick points or lines...
Summary of many years of injection mold design experience
I am engaged in injection molding processing mold structure design, the previous design of household appliances, cars, electronic devices product class mold. The design level is not necessarily very high...