Cause1.Injection pressure or barrel temperature
2.Too much feed material
3.Too long advance time of the pump column
4.Unbalance of the feeding port in multiple writing,
5.There is a depressed part in the mold
6.Deep cylinder parts release vacuum problem
7. Mold opening time change
8.Improper finishing of mold surface
9. Mold core misalignment
Corresponding measures1)Reduce injection pressure or high barrel temperature
2)Reduce feeding material
3)Reduce the advancing time of the service station
4) Limit the flow of plastic, as close as possible to the main stream or single-written mold imbalance of each feed opening
5) Eliminate depressions, lighten or increase the release angle
6) Provide sufficient air escape channels
7)Maintain a fixed mold opening time, if necessary, a timer should be used
8)Lighten the surface of the mold writing
9)Adjust the mold center and lock it by using the withdrawal angle.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
The four stages of filling, holding pressure, cooling and demolding tell you - what is the plastic injection molding process
The four stages of filling, holding pressure, cooling and demolding tell you - what is the plastic injection molding process,The plastic injection molding process mainly includes four stages...
Tips for quality control of injection moulding operations
How does this injection moulding factory maintain a saturation of monthly orders despite the current poor environment? The main reason comes from the good quality control of the injection mould processing.
Why do plastic products crack and do you know the reason?
Cracking, including the surface of the parts filamentary cracks, microcrack, top white, cracking and due to the parts sticky mold, runner sticky mold and caused or trauma crisis...
The need for temperature regulation of injection molding molds
The temperature of the injection molding mold has a great influence on the flow of the plastic melt, curing and shaping, production efficiency, and the shape and dimensional accuracy of the plastic parts...