Get 20% Off On Selected Product

  • Tips for quality control of injection moulding operations

Tips for quality control of injection moulding operations

How does this injection moulding factory maintain a saturation of monthly orders despite the current poor environment? The main reason comes from the good quality control of the injection mould processing.

1, Control of raw materials

In the production process, the quality of raw materials is related to the accuracy and service life of the whole set of injection moulds. The quality of the moulds should be thoroughly controlled from this aspect, in the usual manufacturing process also need to find the reason in time, pay more attention to the details.

2, Quality control of drawings

Mould design drawings are considered very important links, in addition to the need for experienced professional design staff design, in addition to the completion of the design also need to be checked and confirmed again, can give injection mold processing and manufacturing convenience.
Injection mould processing

3, Process control

The whole process of mould production is relatively long, so the control of the process and its important, we need to control the entire mould processing direction and technical parameters should be carefully confirmed clear, but also need to do a detailed checklist of inspection work, so that can play a better role in the smooth production of the mould.

4, Confirmation of model and size control

This is a problem that will be encountered by injection moulds, that is, the details are not done, the model or size is not the same, it will lead to no way to use normally.

5, Post-process inspection and batch control

The quality of all industries is not only controlled before production and the process, but the inspection after production is also an essential and important part of the process, after all, if there is a problem in their own factory to check out than to the hands of the customer to find out to be much better.
Last: How to solve shrinkage problems in injection moulding? Next: A few elements that determine the length of use of a two-material, two-colour mould
Latest blog posts

You may like