Get 20% Off On Selected Product

  • How to avoid choosing the wrong injection mold processing process?

How to avoid choosing the wrong injection mold processing process?

In the process of injection mold processing, each manufacturer's designer will have a wide variety of processing process methods and different design approaches. Sometimes, inadvertently choosing a wrong injection mold processing process can lead to a fatal blow to the whole mold project, so how to avoid the fatal choice in injection mold processing?

First of all, we need to understand that when analyzing the mold structure, when it comes to the product structure with a buckle bit, there are generally two ways, it can be designed as a slant top structure or a line bit structure. But as to which program to take, it is necessary to make a specific analysis according to the appearance or function of the product, the specific nature, and carefully study.

The following editorial, based on years of experience in mold making, shares how to avoid fatal choices in injection mold processing.

If the product has the appearance requirements, the product has the external inverted buckle need to do the slant top or line bit, then it is best to choose to do line bit program, because do line bit is more occupy the mold position, but the advantage is that there is no top rotten products or pressure injury before the mold these situations, even if the production process damage is also easy to remove and replace repair.

If you choose to do the slant top solution, you need to take the risk of crushing the front mold, in case of damage, disassembly and repair will become a big project. Even if you do the slanting top of this injection molding process program must be selected as far as possible to the insider's case before choosing. This can effectively avoid the problem of process selection errors.
Last: What are the requirements for temperature control during the injection molding process? Next: How to clean two-color injection molds? What are the methods of cleaning?
Latest blog posts

You may like