We need to know what is meant by overflow. Overflow, also known as spill and flutter, usually occurs in the open and closed positions of the mold. For example, the parting surface of the mold, the gap of the insert, the hole of the ejector, etc. If the overflow is not eliminated in time, it will lead to partial collapse or even damage to the injection mold.
In addition, the overflow from the gap between inserts and ejector holes will cause the finished product to adhere to the mold, thus affecting the demolding process. So what are the factors that lead to the overflow of injection molds?
The following GonSon injection mold manufacturer's editor will give you a detailed explanation of the factors that lead to an overflow in injection molds, as follows.
Injection mold
1. improper adjustment of the mold closing device of the
injection molding machine or improper elbow joint mechanism will cause the mold to fail to achieve the required parallelism, resulting in a tight seal on one side of the mold and a firm seal on the other side, which will easily overflow during the injection process.
2. The parallelism of the
injection molding machine itself is problematic, and the uneven distribution of the tie rods will also cause the mold to fail to close tightly and cause overflow.
3. The fixing ring of the injection machine is severely worn, the screws are too worn, the injection volume in the barrel is not enough, and the cushion is too small, which may lead to overflow.
4. Poor accuracy of mold parting surface, deformation and warpage of movable template (such as a center plate), foreign objects on the parting surface, and protruding sliding burrs around mold seat can cause injection mold overflow.
5. The mold design is not reasonable. If the opening position of the mold cavity is offset too much, the one-way tension of the mold will be too large during the injection process, thus producing flying edges.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
How to maintain injection molding machine?
Therefore, how to ensure the normal and stable operation of injection machines in continuous production is a problem worthy of attention and effort for both injection machine manufacturers and users.
What is so good about the "all-electric injection molding machine"?
The reason why all-electric injection molding machine is popular in the market is that it has a performance that cannot be achieved by an all-hydraulic injection molding machine, mainly in the following aspects.
Injection mold cooling water leakage failure and troubleshooting methods
Injection mold cooling water leakage is often occurring for many reasons, mainly in the following areas.1. the most occurring at the joints of the cooling water pipes of the mold, if the leakage...
How to judge the quality of the finished product of silicone injection molding process
Plastic products I think we should not be unfamiliar with it, with the development of modern technology, more and more plastic products continue to emerge in front of everyone, so as a consumer...