Two-color
injection mold in the process of use will appear in the form of failure, such as plastic deformation failure, plastic mold fracture, cavity surface wear and corrosion, etc., that cause failure of what are the reasons? The following two-color mold manufacturers to provide a specific introduction.
First, plastic deformation failure causes
(1)
two-color injection molding using materials of insufficient material strength and toughness, deformation resistance is low.
(2) The hardening layer on the surface of the
plastic mold cavity is too thin, and the deformation resistance is insufficient or the working temperature is higher than the tempering temperature for phase change softening.
Second, the plastic mold fracture reasons
By the temperature difference generated by the structural stress, thermal stress or due to insufficient tempering, the use of temperature, residual austenite into martensite, resulting in local volume expansion, in the two-color injection mold internal tissue stress caused by.
Third, the cavity surface wear and corrosion causes
(1) The enhanced resin filler in the plastic will produce scouring, wear and corrosion on the surface of the mold cavity.
(2) At the same time, plastic processing containing chlorine, fluorine and other components of the thermal decomposition of corrosive gases HCl, HF.
(3) The plastic melt flows in the mold cavity with a certain pressure, and the solidified plastic parts are taken out from the mold, which will cause friction to the mold forming surface and cause abrasion.
The above is the analysis of what are the reasons for the failure of two-color
injection molds introduced by the two-color mold manufacturer, I hope it can provide reference for you.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
How to prevent shrinkage fluctuation of plastic parts for precision injection molding products?
Precision injection molding is based on the premise that the mold can be made to the desired size. However, even if the mold size is certain, the actual size of the product varies depending...
What should I do if my injection molded products produce nozzle saliva?
Spraying, also called spray marks and spray saliva, refers to the 65 thread-like flow lines that appear at the gate of the product, mostly appearing when the mold is a side gate. When the plastic melt...
What do we need to pay attention to in transparent plastic injection molding?
Transparent plastic, because of the high light transmission rate, must require strict surface quality requirements for plastic products, which cannot have any mottling, porosity, whitening...
Preventing screw slippage on injection molding machines
For hygroscopic materials (such as nylon), high resin moisture content can also cause screw slippage. Improper drying can significantly reduce the viscosity of the material and cause the phenomenon of air-packed material in the screw, thus reducing the co