For the injection mold, polishing is one of the essential links, but the key is to grasp the degree of polishing.
If the polishing is too light, it will not reach the desired effect; but if the polishing is too much, it will also form bad consequences for the
injection mold.
Self-polishing of the injection mold is to reach the mirror finishing effect, and then deal with the mold appearance of micro-hole and other problems.
Injection mold
The so-called over-polishing refers to the polishing time being too long, making the appearance of the
injection mold quality is getting worse.
When the injection molding tool is over-polished, it will present two phenomena: orange peel and micro-pit, which are mostly produced in the mechanical polishing process of the mold.
Orange peel is an irregular, rough appearance, because the polishing pressure is too large and polishing time is too long, as well as the polishing method is not appropriate and other reasons to form.
Because of the lack of
injection mold polishing skills, many people polishing process found that the appearance of poor quality, will increase the polishing pressure, and extend the polishing time, coupled with the improper polishing process, but this is often counterproductive to make the appearance of the quality becomes worse.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
What is the difference between blow molding process and injection molding process?
Blow-molded products are hollow; injection molding has an injection port, so a small part of the product will be cut off after molding, but if you look closely, you can still find it.Injection molding...
Analysis of the causes of under-injection of injection molded products
Under-injection, also known as short shot, under-filling, under-filled parts, commonly known as under-injection, refers to the phenomenon of partial incompleteness...
What should I do if the temperature rise of the injection molding machine is too high?
Plastic machine temperature rise is too high for the reason,1. The oil tank is very small, the total area of heat exhaust is not enough, refrigeration equipment but its volume is too small...
How to deal with the deformation problem encountered in the processing of two-colour moulds?
Two-colour moulds in the process of processing will occur deformation, which will seriously affect the quality of two-colour moulds, affecting production efficiency, so how should be solved? The following manufacturers to analyze the two-color mold proces