A. Excessive heating of plastic in the injection cylinder.
Lower the melt temperature.
B. Temperature controller is not operating properly.
Check that the temperature controller is in the correct area to control the injection cylinder.
Recalibrate the temperature controller and check for sticky contact, etc.
C. Incorrect thermocouple type is being used.
Check that the thermocouple type used is the same as that provided on the temperature controller, such as FECON.
Check that all thermocouples are operating satisfactorily.
D. The plastic is being held in the injection cylinder for too long.
Check the injection weight, if it is less than 25% of the injection pressure of the
injection machine, turn the mold to a smaller injection machine.
If a
smaller machine is not available, reduce the injection cylinder temperature to a minimum, which will produce a quality injection part.
E. Plastic stays in the injection cylinder when production is stopped.
When stopping production, clean the injection cylinder so that the screw is in the most forward position.
F. Plastic is "stranded" somewhere in the injection cylinder and degrades.
Look at the injection cylinder and remove any residue from the clamping surface.
2. Mold
A. The injection volume of the mold is too small.
Move the mold to a smaller capacity
injection molding machine.
3. Plastic
A. The moisture content in the plastic is too high.
Use the correct drying sequence.
B. The quality of reuse material is different or contains impurities.
Separate and strictly check the impurities in the reused material.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
What kind of injection molding machine configuration is really suitable for use?
Mold temperature machines can improve the molding efficiency of products, reduce the generation of defective products, improve the appearance of products, suppress product defects, speed up the production schedule, reduce energy consumption and save energ
Some principles of injection mold casting system design
I. The composition of the pouring system,A common runner system, also known as a sprue system or pouring system, is the necessary passage of molten plastic from the nozzle of the injection molding machine...
The main points of plastic mold processing and molding types
A plastic mold is a compact tool. It has a messy shape and bears the expansion force of the blank. Therefore, there are high requirements for structural strength, stiffness, general...
Fusible core injection molding, have you ever encountered it?
The basic principle of fusible core injection molding is to first cast a fusible core using a low melting point alloy, then put the fusible core into the mold as an insert for injection molding...