Get 20% Off On Selected Product

  • injection molding machine

injection molding machine

Custom molds injection molding

Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...

Read More

Plastic injection molding machine price

Plastic injection molding machines have revolutionized the manufacturing industry by making it possible to produce high-quality plastic products in large quantities at an affordable cost...

Read More

What are the adverse effects of multiple mold trials for automotive plastic molds?

We would like to introduce to you how the adverse effects of multiple mold trials for automotive plastic molds.If the design of the automotive plastic mould is not well reviewed, the injection...

Read More

Pressure control for two-colour injection moulding processes

Pressure control for two-colour injection moulding processes,The two most important processes in two-colour injection moulding are filling and pressure-holding...

Read More

How to judge the quality of the finished product of silicone injection molding process

Plastic products I think we should not be unfamiliar with it, with the development of modern technology, more and more plastic products continue to emerge in front of everyone, so as a consumer...

Read More

What are the five major hazards of high temperature rise of injection molding machine?

Injection molding machine temperature rise is too high five major hazards: so that the mechanical thermal deformation, oil viscosity decreases, rubber seals deformation, accelerating the oxidation of oil...

Read More

What is so good about "all-electric injection molding machine"? 

The reason why all-electric injection molding machine is popular in the market is that it has the performance that cannot be achieved by all-hydraulic injection molding machine, mainly in the following aspects.

Read More

What should I do if the temperature rise of the injection molding machine is too high?

Plastic machine temperature rise is too high for the reason,1. The oil tank is very small, the total area of heat exhaust is not enough, refrigeration equipment but its volume is too small...

Read More

What is the impact of injection molding process on product function?

Plastic materials are taking up a higher and higher proportion in daily life, and the regulations for their quality are also getting higher and higher. The injection molding process is a key manufacturing...

Read More

Summary of many years of injection mold design experience

I am engaged in injection molding processing mold structure design, the previous design of household appliances, cars, electronic devices product class mold. The design level is not necessarily very high...

Read More

Engineering Plastics Processing Considerations

Dimensional stability and the ability to maintain tight tolerances on finished machined parts. Often, when a customer is experiencing dimensional movement, the cause is not one or the other, but a combination...

Read More

In-depth analysis of the causes of injection molding defects

Cracking, including the surface of the parts filamentary cracks, micro-crack, top white, cracking and caused by the parts sticky mold, runner sticky mold or trauma crisis, according to the cracking time is divided...

Read More

13 factors to consider for TPE injection molding process setting

TPE material injection molding prone to problems and solutions!TPE injection molding process refers to the processing of tpe materials to synthesize polymers. Appearance is affected by many factors, in its production...

Read More

Plastic shrinkage of common problems and solutions under

8 scorching, airlines,Analysis of the causes: generally known as scorching (Burn Mark) includes the surface of the product due to plastic degradation resulting in discoloration and the filling end of the product...

Read More

Plastic shrinkage of common problems and solutions on

Plastic shrinkage is the problem of plastic shrinkage,1. Four kinds of plastic shrinkage,Thermal shrinkage, phase change shrinkage, orientation shrinkage, compression shrinkage and elastic recovery...

Read More

ABS injection molding process fact sheet

ABS plastic has large mechanical strength and good overall performance, in the electronics industry, machinery industry, transportation, construction materials,

Read More

Injection molding process, temperature control of each process!

1. Barrel temperature.The melt temperature is very important and the injection cylinder temperature used is only a guide. The melt temperature can be measured at the injection nozzle or by using the air injection method...

Read More

20 kinds of plastic processing molding characteristics full analysis

At present, as product designers, our plastic parts design stays on the number mold design, and more productive process design is at the plastic parts suppliers. But to achieve reasonably or even the best design...

Read More

Five kinds of injection molding tuning techniques

Injection molding machine tuning is a necessary skill for injection molders. Although many tuning techniques are based on theory, reliance on experience is indispensable. In this article, we have...

Read More

When designing injection molds, you should pay attention to these parameters!

There are two templates on top of the injection molding machine, one is not moving, called fixed template the other one can be moved, called moving template. The mold is fixed on these two templates by screws and pressure plates respectively. When the mol

Read More

Two-color/multi-color injection molding technology and material selection

Two-color injection molding is to uses two types of plastic injection for one part.Broadly speaking, two-color injection molding includes over-molding, which is achieved by injection molding twice with a common injection molding machine...

Read More

What are the precautions for injection molding test molds?

I. Preface,When we receive a new pair of molds need to prove the mold, we are always eager to try out a result earlier and pray for a smooth process to avoid wasting time and causing trouble...

Read More

A complete list of solutions to the vibration of injection molding machine opening

Open clamping mold is the most prone to vibration, and vibration has a greater impact on the life and stability of the machine, so please note the following when adjusting the open clamping mold: slow mold opening speed...

Read More

17 considerations for injection molding mold design to avoid product defects

The mold industry is a basic industry in the manufacturing industry, is the basis for the transformation of technological achievements, and at the same time itself is an important area of high-tech industry...

Read More

Inventory of the advantages of all-electric injection molding machines

The reason why all-electric injection molding machine is popular in the market is that it has the performance that cannot be achieved by the all-hydraulic injection molding machine, mainly in...

Read More
Recent Blog