Product seam marks are usually caused by low temperature and low pressure at the seam line.
1、Temperature problem
1). The temperature of the barrel is too low.
2). Nozzle temperature is too low.
3. The mold temperature is too low.
4). The mold temperature at the seam is too low.
5. Uneven temperature of plastic melt.
2、Injection problems
1). Injection pressure is too low.
2). Injection speed is too slow.
3、Mold problems
<1> Poor exhaust at the splice.
<2> Poor exhaust of parts.
<3> Too small manifold.
<4>Gates too small.
<5> Three-runner inlet diameter is too small.
<6>Nozzle hole too small.
<7>The gate is too far away from the seam, and the auxiliary gate can be added.
<8>The wall thickness of the product is too thin, resulting in premature curing.
<9> Core offset, resulting in thinness on one side.
<10>Mold offset, resulting in one-sided thinness
<11>Part is too thin at the splice and thickened
<12> Unequal mold filling rates.
<13> interruption of mold filling material flow.
4、Equipment problem
1). Plasticizing capacity is too small.
2). The pressure loss in the barrel is too large (plunger injection press).
(6) Material problems.
1). Material contamination.
2). Material fluidity is too poor, add lubricant to improve fluidity.
Latest blog posts
Custom molds injection molding
Custom molds injection molding is a manufacturing process that involves creating custom molds to produce plastic parts. Injection molding is a popular technique used in various industries such as...
Plastic injection molding companies
Plastic injection molding is a manufacturing process that involves injecting molten plastic into a mold to create a wide range of plastic products. From car parts to medical devices and household items, plastic injection molding is used to create a variet
PET Preform Injection Moulding Machine
PET preform injection molding is a manufacturing process that is used to create PET (polyethylene terephthalate) preforms that can be later blown into bottles, jars, and other containers. This process...
You may like
The importance and tips of injection molding tooling
The grinding of the injection mold is a very important link, it can determine whether the appearance of the injection mold is exquisite, so today GonSon injection mold manufacturer's editor。。
What is PET bottle mould?
PET moulds are designed by 3D computer drawing, which can be matched with various domestic and foreign brand machines, and can make various kinds of blowing moulds according to...
Six scientific injection molding process optimization steps
1)Viscosity curve,The viscosity curve is made to select a suitable injection speed that will not cause large changes in melt viscosity when there are small fluctuations in each parameter. The fluctuation between each mold should be as small as possible to
Four kinds of mold surface treatment technology
In the work of the mold, in addition to the requirement that the substrate has a reasonable match of high enough strength and toughness, its surface properties are crucial to the working performance and service life of the mould.