Get 20% Off On Selected Product

  • Blog

Blog

What is the principle of injection molding of foamed plastics?

Foamed plastics are thermoplastic or thermosetting resin-based plastics with numerous tiny pores inside. Foaming is one of the most important methods of plastic processing...

Read More

Regular maintenance check time and items for injection molding machines

To ensure the normal operation of injection molding machines, reduce the occurrence of faults, maintain the high performance of injection molding machines, service life...

Read More

16 kinds of thin-walled injection molding defects improvement method full explanation

I. What is thin-wall injection molding,Thin-wall injection molding technology is also known as thin-wall plastic injection molding technology. There are three definitions of it as follows...

Read More

Summarize the most practical POM injection molding process

POM (also known as SAI steel, Trim). It is obtained by polymerization of formaldehyde, etc. POM-H (polyacetal homopolymer), POM-K (polyacetal copolymer) is high-density...

Read More

Child safety seat injection molding and blow molding process of the 4 major differences

Plastic parts are a large part of the child safety seat, the quality of the plastic parts determines whether they will break in the event of an accident. Child seat plastic...

Read More

How to solve the plastic injection molding mold release difficulties

After the plastic injection molding, the plastic parts are taken out from the mold cavity, and the demolding work is generally completed at one time, no matter the single or...

Read More

Five major hazards of high injection molding machine temperature and how to deal with them

The moving parts with different thermal expansion coefficients in the hydraulic components become stuck due to the small clearance, causing malfunction, affecting the transmission...

Read More

How to eliminate surface defects of injection molded products?

Visible defects on the surface of injection molded products include dark spots, gloss differences or fogged areas, and surface wrinkling or what is called orange peel. Usually...

Read More

What is PET bottle mould?

PET moulds are designed by 3D computer drawing, which can be matched with various domestic and foreign brand machines, and can make various kinds of blowing moulds according to...

Read More

TPE,TPR injection molding process tips

First, the surface of the products must be dried before injection molding if the requirements are strict. Generally, it is 70~80℃/2h for hopper drying or 80~100℃/1h for...

Read More

How to repair the injection molding machine?

Introduction: Injection molding machine is also known as injection molding machine or injection machine. It is the main molding equipment to make thermoplastic or thermosetting plastic...

Read More

Injection Molding Machine Manufacturer & Factory in Shanghai, China

What is the development status of injection molding machine manufacturers in the industry? Although the demand for injection molding products in the market is a lot, in the...

Read More

Injection molding machine maintenance of common failure problems and solutions?

Injection molding machine in improper operation or improper use will also occur when a lot of failure problems, really in understanding the injection molding machine repair should have...

Read More

Injection molding process parameters and their adjustment

I. The injection molding process can be simply expressed as follows,The previous cycle is finished - mold closure - filling - holding pressure - glue back - cooling - mold opening...

Read More

Analysis of three aspects of injection molding machine failure to open the mold

In the maintenance of injection molding machines, we often encounter the failure to open the mold. The failure to open the mold is mainly divided into no action with pressure...

Read More

What are the benefits of high or low injection speed?

The most important process conditions in the injection molding process are the temperature, pressure, speed and the corresponding individual action time that affect the plasticizing...

Read More

12 tips to solve the under-injection of injection molding products

1. Insufficient amount of material or bedding material. Adjust it moderately until the part is completely filled.2. The barrel temperature is too low. When the material temperature is low, the viscosity of the melt is larger

Read More

One-stop solution for injection molding machine in medical packaging industry

The D series all-electric injection molding machine is developed by GonSon's experience in designing all-electric injection molding machines, which adopts the integrated design...

Read More

Possible failures and diagnostic steps of the hydraulic system of injection molding machines

When using injection molding machines, the possible failures of the hydraulic system of injection molding machines are various. It is the result of a combination of many factors...

Read More

What are the influencing factors of the injection process?

The correct formulation of the injection process is to ensure good plasticization of the plastic melt, and smooth filling, cooling, and shaping, to produce products of the required...

Read More

The relationship between injection stroke and screw length of injection molding machine

The length of the screw and the injection stroke of the injection molding machine seem to be two different things at first glance, but in fact, there is a subtle "quality and quantity"...

Read More

What are the key points of injection molding trial mold?

I. Preface,When we receive a pair of new molds needed to prove the mold, we are always eager to try out a result earlier and pray for a smooth process to avoid wasting time and...

Read More

PP injection molding six key points

The plastic raw material processing process is mainly molten rubber particles, flow, shaping and cooling into finished products, is a process of heating and then cooling, but also the...

Read More

How to solve the problem of broken products after adding color masterbatch in injection molding?

Under the sunlight, there are streaks of pigment bands in the products This problem needs to be considered from two aspects: the physical and mechanical properties of plastic...

Read More

Process tips for shrinkage problems of thick-walled injection molded parts

The shrinkage problem of plastic parts (surface shrinkage and internal shrinkage) is caused by the defect of insufficient melt replenishment when the thicker parts are cooled. We...

Read More
Recent Blog